Automated garage doors may encounter problems like any other machine. They can experience wear and tear and issues caused by environmental factors anytime. However, homeowners should know quick fixes to common problems to ensure their automated garage doors last a lifetime. But what are the immediate solutions to common mechanical garage door problems? Here are some ideas.
- Motor Won’t Shut Off
If you notice that the automated garage door won’t shut, the problem may be caused by the motor. It could be jammed, or the cord could be damaged. In this case, you need to manually lift the door off its tracks or detach the cable from the motor.
Afterward, inspect the motor and cord for any significant damage. If the engine and line are all in good condition, you can reinstall the motor and check the battery. Sometimes, the motor will not shut off when the garage door is closed. The problem is commonly caused by the blockage of the sensors or motor. Therefore, ensure nothing blocks the sensors next time.
- Closing Door Produces Loud Thud
If you notice a loud thud when you close the automatic door, the problem could be caused by the motor. It may be loose, or the gear may be damaged. But most likely, the problem is caused by a misaligned door.
Homeowners will have to either bend the track back into place or replace it with a new one to fix the problem. However, before turning the trail, ensure that the path stays connected from the rail on one or both sides.
- Door is Off Hinges
If you notice the door is off its hinges, the spring could cause the problem. The spring is broken if you hear a loud click when you open the door. Fortunately, there are replacement springs available for purchase.
However, the spring is not the only component that can be damaged. The garage door opener is also susceptible to damage. Wear and tear and general wear and tear can cause the garage door opener to malfunction.
- Door is Stuck
A stuck door means a broken cable or motor. The line is usually the problem when the door is stuck. If you notice the cable has snapped, you will have to replace it. However, some garage doors have lines that are covered by the tracks. Homeowners will have to detach the cable from underneath the way to replace the cable.
The motor is another component that commonly troubles homeowners. Replacing the motor is easy. You will only have to detach the engine from the rails and take it apart. The replacement process is much easier because the motor and the track are separate.
- No Power
If the battery is dead or you don’t have batteries installed, the garage door will not open. You can fix this problem quickly. The first thing you need to do is install or replace the batteries or install a new battery. Homeowners can purchase new batteries on a website like Amazon.
Once the battery is installed, test the automatic garage door. If the problem persists, you may have to check the control box. You can check the control box by removing the backplate of the control box. You will find the problem there. Before replacing the control box, check the other components first.
Conclusion
Homeowners can solve most problems with automatic garage doors. The solutions are easy, provided you carefully study the issue. It is always best to check the batteries and the control box before replacing the cable or preparing for a new motor.
Local Garage Door Repair Fort Lauderdale specializes in automatic garage door repair, helping homeowners extend the functionality of their garage door longer. Our local garage door services should ensure the gates function correctly upon installation. Speak to our garage door installers today or book an appointment on our website today.
